The Sony NEX-FS700 Super 35 Camcorder (Body Only) is a fully professional large-sensor video camera. Hot on the heels of the FS100, this compact, highly modular camera uses a very similar-sized Super 35 CMOS sensor as the FS100. But as a marked improvement over that earlier model’s sensor, the FS700 features a native 4K resolution sensor.

Sony NEX-FS700 is able to shoot full 1080p video in a range of frame rates up to 60p, the FS700 provides the option of recording AVCHD footage onto SD card/MemoryStick or via the FMU (flash memory unit) port, or it can output 4:2:2 video (with embedded timecode) via HDMI 1.4 or 3G/HD-SDI to an external recording unit.
“I have purchased the newly released Sony FS700 Camcorder, it records MTS videos, when I import the recordings to Final Cut Pro 7 I always got problems, can you give me some suggestions to help me import Sony FS700 MTS clips to FCP?”

As this FS700 record videos in AVCHD MTS format, users may meet some problems when edit the video files in FCP 6/7/X. AVCHD MTS is not supported by FCP 6/7/X natively, you will need to convert Sony FS700 AVCHD to MOV before editing in FCP 6/7/X. To do the job, Drorsoft HD Converter for Mac is a good tool.

FCP 7 and FCP X supported best video format is Apple ProRes 422 codec MOV format, and AVCHD MTS format is not friendly for editing, so FCP 7/X doesn’t support Sony FS700 AVCHD footages well. The best method to solve this problem is to convert Sony FS700 AVCHD MTS footage to ProRes for editing in Final Cut Pro 7/X, you can follow the steps below to transcode Sony FS700 AVCHD MTS to FCP 7/X via Sony NEX-FS700 to FCP Converter.

1.Load AVCHD files into Sony NEX-FS700 Video Converter

After install and launch the Drorsoft HD Video Converter Mac, drag and drop Sony FS700 AVCHD MTS file. You can drag several files to the program directly.

2.Choose output format

Apple ProRes MOV is the best format for Final Cut Pro, here you just need to choose the target application as output format, for example, “Final Cut Pro->Apple ProRes 422(*.mov)”.

3. Do some settings as you want.

4.Transcode Sony FS700 AVCHD to FCP 7/X

At last, hit the “Convert” button to transcode Sony FS700 AVCHD MTS to FCP 7/X.
With Drorsoft Sony FS700 AVCHD to Apple ProRes 422 converter, you can easily change Drorsoft Sony FS700 AVCHD files to FCP 6/7/X for editing, this software runs fast, so you can convert your Sony FS700 AVCHD footages to FCP 6/7/X in less time, video and audio synchronization are perfectly guaranteed.

創作者 AimeeAmy 的頭像


AimeeAmy 發表在 痞客邦 留言(0) 人氣()